Bosch Rexroth SMART Flex Effector Manual page 33

33
Screen
8 Updating the firmware
en
Desktop software: SFE tool as a file for download
Action steps
The FastFlash (1) setting is activated as

standard. Keep this as it is to speed up the
firmware update.
Note

If there are Flash problems, FastFlash
can be deactivated. Problems may occur
in particular because of high baud rates
and long connection cables.
 Click on Flash (2).
 The firmware update process starts.
Note

During the Flash process, the power
supply of the SFE unit must not be
interrupted.
 Once the firmware update is complete,
Flashed successfully is shown as a
message (1).
 Confirm with OK (2).
 Close the Firmware Update window with X
(3).
 Check the FIRMWARE VERSION (4).
5