Bosch Rexroth SMART Flex Effector Manual page 40

40
Screen
en
Desktop software: SFE tool as a file for download
Action steps
 If necessary, click Stop (2) to terminate an
ongoing measurement (1).
 If necessary, click Reset (1) to clear the
shown measurement.
 If necessary, click Export (.csv) (2) to save
the measurement in csv format.
 If necessary, click Export (.png) (3) to save
an image of the measurement in png format.
 If necessary, click Import (.csv) (4) to show
past measurements.
 If necessary, click on Zero Sensors (5) to
remove the offset of the measured values.
Note

This option is not available in the default
settings. This is because, as part of the
temperature compensation in the locked
state, the measured values are
compensated depending on the ambient
temperature at which the offset is
removed. Even if the temperature
compensation is switched off, it is not
possible to only zero the sensors in the
locked state and for a measurement
which is not ongoing.
 If necessary, activate the checkbox Disable
plotting (6) for long-term measurements to
deactivate the measurement display. The
measurement continues in the background.
5