Table of Contents
Advertisement
w
e
q
q
Using the Seam Guide Lines
The seam guides on the needle plate and hook
cover help you to measure seam allowance.
Numbers
10 15 30 40 3/8 1/2 5/8 1 1 1/2
Distance
1 1.5 3
(cm)
Distance
— — — — 3/8 1/2 5/8 1 1 1/2
(inch)
q Guide lines
w Center needle position
e Distance from the center needle position
Turning a Square Corner
The cornering guide helps you maintain a 5/8˝
(1.6 cm) seam allowance when sewing a corner.
When the fabric edge facing you lines up with
the cornering guide as illustrated, stop stitching
and lower the needle into the fabric by turning the
handwheel toward you.
Raise the presser foot and pivot the fabric so the
edge of the fabric will align with the 5/8˝ (1.6 cm)
seam guide.
Lower the presser foot and start stitching in the
new direction.
q Cornering guide
34
4 — — — —
—
Advertisement
Table of Contents
