aventon Soltera 7 User Manual page 10

NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are
not a complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult
a certified, reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike.
Step 1. Unpack the bike. Open the bike box, with another person' s help who' s capable of lifting a heavy
object, take out the Soltera 7 from the bike box. Carefully remove the packaging material protecting
the bike frame and components and remove the small boxes inserted in the foam. These are your charger
and accessories. Please recycle packaging materials, especially cardboard and foam, whenever possible.
Step 2. Remove all the package foam and ribbon. (Be gentle if you use scissors)
.
Step 3. A. Remove the stem rubber cover, loosen the bolt using a 5mm hex key, and discard the plastic white
protective guard
B. Place the handlebar onto the stem with the display facing upwards. Remove the top cap and use a 5mm
hex key to tighten the screw in order to secure the handlebar stem. Reinsert the rubber cover back into
the top cap.
Step 4: Install the front wheel
A. Remove the plastic insert by stepping one foot on it then lifting the fork.
10