Replaced Or Removed Commands In Data Ontap 8.0 7-Mode - IBM N Series Manual

Replaced or removed commands in Data ONTAP 8.0 7-Mode

The following information lists replaced or removed commands in Data
ONTAP 8.0 7-Mode.
Support for the following commands will be discontinued in a future version
of Data ONTAP. To perform the equivalent operation, use the aggr command.
v vol add
v vol media_scrub
v vol migrate
v vol mirror
v vol scrub
v vol split
v vol verify
v vol wafliron
These commands are removed in Data ONTAP 8.0 7-Mode.
v snapmirror store
v snapmirror use
v snapmirror retrieve
In Data ONTAP 8.0 7-Mode the vif command has been replaced by the ifgrp
command. For more information, see the Data ONTAP 8.0 7-Mode Network
Management Guide.
56
IBM System Storage N series: Data ONTAP 8.0.4 7-Mode Release Notes