IBM N Series Manual page 17

For more information, see "Requirements for running Data ONTAP 8.0
7-Mode" on page 61.
New cautions in Data ONTAP 8.0.3 7-Mode
The following new cautions are introduced in Data ONTAP 8.0.3 7-Mode:
"System might panic if the network configuration entries in the /etc/rc file
v
are not in the recommended order" on page 76
"Storage system might panic when not specifying an export path" on page
v
77
"Non-ASCII characters in the comment string of the lun setup command
v
result in system panic" on page 79
For more information about all important cautions in the Data ONTAP 8.0
release family, see "Important cautions" on page 65.
Cautions removed in Data ONTAP 8.0.3 7-Mode
The following caution that was included in Data ONTAP 8.0.x Release Notes
has been removed in Data ONTAP 8.0.3 7-Mode:
v Do not remove the special system files that are for restoring LUNs in
snapshot copies
New known issues and limitations in Data ONTAP 8.0.3
7-Mode
Data ONTAP 8.0.3 7-Mode includes the following new known issues and
limitations:
"The wrfile command might fail to capture all input during a
v
cut-and-paste operation performed through the RLM or SP" on page 88
"Storage system in an HA pair might get rebooted during a controller or
v
NVRAM replacement" on page 94
"Change in routing configuration maximum value" on page 95
v
"Domain user unable to execute CLI commands" on page 100
v
v "CIFS shares with comment ending with backslash disappear" on page 100
"Removing stale entries from the access cache" on page 100
v
"CIFS authentication failure with Windows Server 2008 R2 read-only
v
domain controllers" on page 100
"Too many CIFS audit files can cause system performance degradation" on
v
page 101
"CIFS client authentication fails if host name exceeds 16 characters" on
v
page 101
Changes introduced since Data ONTAP 8.0
7