Supported Snmp Versions In Data Ontap; Tls Not Supported In Data Ontap 8.0 - IBM N Series Manual

routed daemon on. Turning the routed daemon off might cause unexpected
routing behavior if dynamic routing is used.
The topic "The routed daemon" is updated for the following information:
If you require dynamic routing in untrusted environments, you must use
RIPv2 with authentication. This is because routed daemon poses a security
risk if RIPv1 is used in untrusted environments.

Supported SNMP versions in Data ONTAP

The "How to monitor your storage system with SNMP" topic has updated
information about support for SNMP version 2. For diagnostic and other
network management services, Data ONTAP provides an SNMP agent
compatible with SNMP versions SNMPv1, SNMPv2c, and SNMPv3.

TLS not supported in Data ONTAP 8.0

TLS is not supported in Data ONTAP 8.0 7-Mode. The SSL section of the "IP
port usage on a storage system" chapter incorrectly includes information on
TLS.
134
IBM System Storage N series: Data ONTAP 8.0.4 7-Mode Release Notes