Set System Time; Control Leds - TP-Link RE200 User Manual

Chapter 7
7 1
The System Time of the extender will be used for time-based function such as the
Power Schedule function. If you have enabled the
system time will be synchronized with the daylight saving time you configure.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to
• To get system time:
1. Select your local
2. Click Save.
• To set up Daylight Saving Time:
1. Select
2. Select the
zone.
3. Click Save.
7 2
The LEDs of the extender indicate its activities and status. You can turn off LEDs when
you don't need them.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
Downloaded from ManualsNet.com

Set System Time

Settings > System Tools
Time Zone from the drop-down list.
Enable Daylight Saving
Start and End date and time of the daylight saving time at your local time

Control LEDs

search engine
Daylight Saving Time
> Time Settings.
Time.
Manage Your Extender
feature, the
39