Chapter 3
3 2
Once the extender is connected to a TP-Link OneMesh router via web browser or WPS
button, the extender will automatically join the router's OneMesh network and copy
the router's wireless settings. You can manually join a OneMesh network during the
configuration via the TP-Link Tether app. For more information about setting up the
extender with OneMesh network, refer to
If you have already set up the extender before without joining the OneMesh network,
choose one of the methods below to set up a OneMesh network:
Note:
Before setting up a OneMesh network, it is recommended to enable
seamless connection between dual-band networks.
3 2 1
1. Launch Tether and select the extender you want to join the OneMesh network.
2. Go to
Tip:
If your host router does not support OneMesh, you need to reselect a host network first. Go to
click
Reselect Host Network,
3. Follow the app instructions to join the OneMesh network.
3 2 2
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to
Downloaded from
ManualsNet.com
How to Set Up a OneMesh Network
Method 1: Via the TP-Link Tether App
Tools
>
OneMesh
and enable OneMesh.
and then follow the app instructions to complete the configuration.
Method 2: Via a Web Browser
Settings
>
OneMesh
and enable
search engine
OneMesh with Seamless Roaming
Set Up the
Extender.
Smart Connect
on your host router to enjoy a
Join
OneMesh.
Tools
>
Host Network
and
16
Need help?
Do you have a question about the RE200 and is the answer not in the manual?