Table of Contents
Advertisement
Chapter 5
5. 1.
Set Up System Time
The System Time of the extender will be used for time-based functions such as the
Power Schedule function. If you have enabled the Daylight Saving Time feature, the
system time will be sychronized with the daylight saving time you configure.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to
Settings
>
System Tools
¾ To get system time:
1. Select your local
Time Zone
2. Click Save.
¾ To set up Daylight Saving Time:
1. Select
Enable Daylight Saving
2. Select the
Start
and
zone.
3. Click Save.
5. 2.
Control LEDs
The LEDs of the extender indicate its activities and status. You can enable the Night
Mode feature to specify a time period during which the LEDs are off.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
>
Time
Settings.
from the drop-down list.
Time.
End
date and time of the daylight saving time at your local time
Manage Your Extender
24
Advertisement
Table of Contents
