Chapter 5
5 6
The High Speed feature switches off one of the wireless bands to leave one high-
performance, super-fast network, ideal for HD streaming and gaming applications.
If most of your devices are connected to one wireless band, this feature can increase
the overall performance of your wireless network.
Note:
Before enabling this feature, make sure that your extender is in Range Extender mode and not in a OneMesh network,
and then go to
Additionally, if you are going to disable the 2.4GHz network, it's recommended to first make sure all your wireless devices
support 5GHz network connection.
1. Visit
for the extender.
2. Go to
3. Enable
4. Select a high speed mode as needed.
•
•
Downloaded from
ManualsNet.com
Set High Speed Mode
Settings
>
Wireless
>
Extended Network
http://tplinkrepeater.net
Settings
>
Advanced Settings
High Speed
Mode.
Select the
Auto
mode. The extender will decide which band the high-speed
network will work on based on its wireless connection to your host router. The
other band will be disabled.
Select the
Manual
mode and choose to transmit 2.4GHz band or 5GHz band only.
search engine
to check that the 2.4GHz and 5GHz bands are both enabled.
and log in with your TP-Link ID or the password you set
>
High
Speed.
Customize Your Network
32