Register A Tp-Link Id; Change Your Tp-Link Id Information - TP-Link RE200 User Manual

Chapter 4
4 1
When you log in after initial setup, the web page will ask whether you need TP-Link
Cloud service. You can also access the TP-Link Cloud settings as follows:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to
3. Click
4. After activating your TP-Link ID, come back to the TP-Link Cloud page to log in. The
TP-Link ID used to log in to the extender for the first time will be automatically bound
as an Admin.
Notes:
• To learn more about the
• Once you have registered a TP-Link ID on the web management page, you can only register another TP-Link ID via the
Tether APP. Please refer to
• If you want to unbind the admin TP-Link ID from your extender, please go to
in the
4 2
Follow the steps below to change your email address and password of your TP-Link ID
as needed.
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID.
2. Go to
• To change your email address:
1. Click
2. Enter the password of your TP-Link ID, then a new email address. And click Save.
Downloaded from ManualsNet.com

Register a TP-Link ID

Settings > TP-Link Cloud.
Register Now and follow the instructions to register a TP-Link ID.
Admin and User
Manage the Extender via the TP-Link Tether App
Device Information section.

Change Your TP-Link ID Information

Settings > TP-Link Cloud, and focus on the
behind the Email.
search engine
TP-Link ID, refer to Manage the User TP-Link
Account Information
TP-Link Cloud Service
IDs.
to install the app and register a new one.
Settings > TP-Link Cloud, an click
section.
Unbind
21