Fitting The Turbine Casing; Fig. 33: Fitting The Turbine Casing; Table 37: Tightening Torque (51007) - ABB HT600042 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9 Dismantling and fitting / 9.13 Fitting the turbine casing
9.13

Fitting the turbine casing

Fitting the turbine casing
Fig. 33: Fitting the turbine casing
Part number
51007
Table 37: Tightening torque (51007)
1. Coat the threads of the studs (51006) with high-temperature grease.
2. Turn the turbine casing (51000) by 180°.
3. Fit two swivel lifting eyes (01) on the turbine casing. Secure lifting gear to the swivel lift-
ing eyes.
4. Place the turbine casing onto the cartridge group.
5. Align turbine casing to the marking.
6. Install the fastening strips (51002) with Verbus Ripp® washers (51003) and hexagon
nuts (51007). Observe the tightening torque.
© Copyright 2017 ABB. All rights reserved.
TPS44
M8
30 Nm
HZTL4037_EN
TPS48
M8
30 Nm
Revision E
TPS52
M10
60 Nm
July 2017