Fig. 21: Removing The Compressor Casing (2/2) - ABB HT600042 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9 Dismantling and fitting / 9.5 Removing the compressor casing
Mark the casing position for assembly.
u
Fig. 21: Removing the compressor casing (2/2)
1. Secure lifting gear to compressor casing (72000).
2. Remove the compressor casing (72000) vertically.
3. Rotate the compressor casing (72000) through 180° and put it in place.
4. Remove and dispose of O-ring (42012) (refer to chapter Disposing of turbocharger com-
ponents →74).
5. Remove screw (72041).
6. Remove the diffuser (79000) vertically from the compressor casing.
© Copyright 2017 ABB. All rights reserved. HZTL4037_EN Revision E July 2017