Fig. 7: Inserting Threaded Rods Into The Bracket; Fig. 8: Requirements For Threaded Rods; Table 4: Requirements For Threaded Rods - ABB HT600042 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
2 Removing and Installing / 2.3 Installing the turbocharger
2.3.2 Fitting threaded rods
Fig. 7: Inserting threaded rods into the bracket
1. Lightly oil the surfaces of the threaded rods (02) to be screwed in.
2. Screw the threaded rods into the bracket with the aid of locknuts (01).
3. Remove nuts (01) again.
Requirements for the threaded rods (02)
Fig. 8: Requirements for threaded rods
Product Diameter
Threaded rod
[mm]
TPS44 Ø 16 / M16
TPS48 Ø 16 / M16
TPS52 Ø 20 / M20
Table 4: Requirements for threaded rods
Fastening material scope of delivery
The threaded rods and nuts for fastening the turbocharger on the bracket are not included
in the ABB Turbo Systems scope of delivery. These parts depend on the version of the en-
gine-side bracket.
© Copyright 2017 ABB. All rights reserved.
Material Thread length
DIN / ISO 898
(Part 1)
10.9 / 12.9
10.9 / 12.9
10.9 / 12.9
HZTL4037_EN
Length of threaded
L1 [mm]
L2 [mm]
≥ 30
≥ 30
≥ 30
Revision E
rod
150
170
195
July 2017