Table 31: Ring Nuts To Be Used - ABB HT600042 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9 Dismantling and fitting / 9.1 Introduction
One swivel lifting eye (S) is required to safely lift this turbocharger. This is not included in
the ABB Turbo Systems scope of delivery.
Swivel lifting eye (S) to be used
Table 30: Swivel lifting eye (S) to be used
Two ring nuts are required for safer lifting of the cartridge group, which are not included in
the ABB Turbo Systems scope of delivery.
Ring nuts to be used (VRM)
Starpoint ring nut VRM
Table 31: Ring nuts to be used
© Copyright 2017 ABB. All rights reserved.
Product Thread
TPS44 M8
TPS48 M8
TPS52 M10
Product
TPS44
TPS48
TPS52
HZTL4037_EN
Length Diameter Minimum load
H [mm] D [mm]
≤ 12 ≤ 25
≤ 12 ≤ 25
≤ 15 ≤ 25
Thread
M16
M16
M20
Revision E
limit
[kg]
300
300
400
July 2017