Mocka Eclipse Assembly Instructions Manual page 9

Eclipse Bedside Table
Assembly Instructions
15
V
Z
W
Attach 4x wedges (J) into the corners of the back of the
unit and secure with 4x screws (K). Tighten with a screwdriver.
Attach 1x safety straps (V) to the top of the back side of the unit as
shown using 1x washers (Z) and 1x screws (W). Tighten with a
screwdriver.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
J
K
V
J
K
Z
W
16
X
Z
Y
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use. You're done, enjoy!
strap
wall
anchor
screw
9