Chapter 3
Installing the Router
Connecting WAN, LAN, and Voice Cables
This chapter describes how to connect the WAN, LAN, and voice interface cables. It includes the
following sections:
•
•
•
One or two Ethernet cables are typically provided with the router. Additional cables and transceivers can
Note
be ordered from Cisco. For ordering information, refer to the
http://www.cisco.com/en/US/products/products_catalog_links_launch.html. For cable pinouts, refer to
the
Documentation CD-ROM.
Warning
Do not work on the system, or connect or disconnect cables during periods of lightning activity.
Statement 1001
Ports and Cabling
Table 3-4
The connections summarized here are also described in detail in the following documents:
•
•
•
You can access these documents at the location described in the
page
OL-2056-05
"Ports and Cabling" section on page 3-37
"Connections for Cisco 3620, Cisco 3640, and Cisco 3631 Routers" section on page 3-39
"Connections for Cisco 3660 Routers" section on page 3-39
Cisco Modular Access Router Cable Specifications
summarizes some typical WAN, LAN, and voice connections for Cisco 3600 series routers.
Cisco Modular Access Router Cable Specifications
Cisco Network Modules Hardware Installation Guide
Cisco Interface Cards Hardware Installation Guide
xvii.
Connecting WAN, LAN, and Voice Cables
Cisco Product Catalog
document available online and on the
"Obtaining Documentation" section on
Cisco 3600 Series Routers Hardware Installation Guide
at
3-37