Hatco HWB-11QT Installation & Operating Manual
  1. Manuals
  2. Brands
  3. Hatco Manuals
  4. Food Warmer
  5. HWB-11QT
  6. Installation & operating manual

Hatco HWB-11QT Installation & Operating Manual

Hwb series built-in singular heated wells
Hide thumbs Also See for HWB-11QT:
Table of Contents

Advertisement

Quick Links

Built-In Singular Heated Wells
This manual contains important safety information
concerning the maintenance, use and operation of this
product. Failure to follow the instructions contained in this
manual may result in serious injury. If you're unable to
understand the contents of this manual, please bring it to
the attention of your supervisor. Do not operate this
equipment unless you have read and understood the
contents of this manual.
HWB Series
Installation &
Operating Manual
I&W #07.05.167.00
Este manual contiene importante información sobre
seguridad concerniente al mantenimiento, uso y
operación de este producto. Cualquier falla en el
seguimiento de las instrucciones contenidas en este
manual puede resultar en un serio daño. Si usted no
puede entender el contenido de este manual por
favor pregunte a su supervisor. No opere este
equipo al menos que haya leído y comprendido el
contenido de este manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HWB-11QT and is the answer not in the manual?

Questions and answers

Related Manuals for Hatco HWB-11QT

Summary of Contents for Hatco HWB-11QT

  • Page 1 Built-In Singular Heated Wells Operating Manual This manual contains important safety information concerning the maintenance, use and operation of this product. Failure to follow the instructions contained in this manual may result in serious injury. If you’re unable to understand the contents of this manual, please bring it to the attention of your supervisor.

  • Page 2: Table Of Contents

    CAUTION without the symbol signifies the possibility of equipment or property damage only. Hatco Built-In Heated Wells are a product of extensive research and field testing. The materials used were selected for maximum durability, attractive appearance and optimum performance.

  • Page 3: Important Safety Information

    Some aftermarket or generic replacement parts do not have the characteristics that will allow them to operate safely in Hatco equipment. It is essential to use Hatco Replacement Parts when repairing Hatco equipment. Failure to...

  • Page 4: Model Designation

    Damage to countertop material such as Corian generated from Hatco equipment is not covered under the Hatco warranty. Contact the manufacturer of the base material for application information. To avoid damage to the unit, do not use steel wool for cleaning.

  • Page 5: Model Descriptions

    EZ locking hardware allows for Heated Wells to be mounted into non-combustible countertops and combustible countertops using optional Hatco mounting kits. Built-In Heated Wells are designed, manufactured, and tested to maintain safe food holding temperatures. HWB-FUL MODELS HWB-FUL models are capable of holding a variety of pan combinations listed below;...
  • Page 6 HWB-11QT MODELS HWB-11QT models are round Built-In Heated Wells that hold up to an 11 QT pan. These models are designed to be mounted to the topside of a non-...
  • Page 7 HWB-FUL Models HWBI-FUL & HWBI-FULD Models HWB-43 Models HWB-7QT Models HWB-11QT Models MODEL DESCRIPTIONS HWBIB-FUL & HWBIB-FULD Models Figure 2. Built-In Heated Well Models HWB-FULD Models HWB-43D Models HWB-7QTD Models HWB-11QTD Models Form No. HWBM-0107...

  • Page 8: Specifications

    SPECIFICATIONS ELECTRICAL RATING CHART FOR LOW WATTAGE HWBL-FUL MODELS Voltage Watts ELECTRICAL RATING CHART FOR STANDARD WATTAGE HWB-FUL MODELS Voltage Watts 1200 1200 1200 1200 1200 220-230 CE 1200 230-240 CE 1200 ELECTRICAL RATING CHART FOR HIGH WATTAGE HWBH-FUL MODELS Voltage Watts 1650...
  • Page 9 ELECTRICAL RATING CHART FOR HIGH WATTAGE HWBH-43 MODELS Voltage Watts 1650 1650 1650 1650 1650 220-230 CE 1650 230-240 CE 1650 ELECTRICAL RATING CHART FOR STANDARD WATTAGE HWB-7QT MODELS Voltage Watts 220-230 CE 230-240 CE ELECTRICAL RATING CHART FOR HIGH WATTAGE HWBH-7QT MODELS Voltage Watts 220-230 CE...

  • Page 10: Dimensions

    SPECIFICATIONS ELECTRICAL RATING CHART FOR STANDARD WATTAGE HWB-11QT MODELS Voltage Watts 220-230 CE 230-240 CE ELECTRICAL RATING CHART FOR HIGH WATTAGE HWBH-11QT MODELS Voltage Watts 220-230 CE 230-240 CE Not available on “UR” series models. NOTE: Shipping Weight includes packaging.
  • Page 11 DIMENSIONS (CONTINUED) Models: HWBIB-FUL HWBIB-FULD HWBLIB-FUL HWBLIB-FULD HWBLIBRT-FULD HWBHIB-FUL HWBHIB-FULD HWBHIBRT-FULD Width Depth 14-7/16" 22-7/16" (366 mm) (569 mm) Models: HWBI-FUL HWBI-FULD HWBLI-FUL HWBLI-FULD HWBHI-FUL HWBHI-FULD Width Depth 13-3/4" 21-3/4" (349 mm) (552 mm) HWBIBRT-FUL HWBIBRT-FULD HWBLIBRT-FUL HWBHIBRT-FUL Height 9-1/2" (241 mm) HWBIRT-FUL HWBIRT-FULD...
  • Page 12 HWBHRT-7QT HWBHRT-7QTD Height 8-3/4" (222 mm) Figure 7. Dimensions – HWB-7QT Models HWBRT-11QT HWBRT-11QTD HWBLRT-11QT HWBLRT-11QTD HWBHRT-11QT HWBHRT-11QTD Height 8-3/4" (222 mm) Figure 8. Dimensions – HWB-11QT Models Non-Insulated – Top Mount Non-Insulated – Top Mount Non-Insulated – Top Mount...

  • Page 13: Installation

    Damage to countertop material such as Corian and similar products caused by heat generated from Hatco equipment is not covered under the Hatco warranty. Contact the manufacturer of the base material for application information.
  • Page 14 INSTALLATION Installing Unit into Combustible Countertop WARNING To avoid any injury or damage Hatco mounting kits must be used when mounting unit in a combustible countertop. NOTE: Cut opening for both the unit and control panel before placing unit into countertop opening.
  • Page 15 Installing Unit into Non-Combustible Countertop NOTE: Mounting flange kit is not required for installation into non-combustible material. NOTE: Cut opening for both the unit and control panel before placing unit into countertop opening. 1. Cut appropriate opening (See Figure 13 for size requirements.) 2.
  • Page 16 Model All HWB-FUL Models All HWB-43 Models All HWB-7QT Models All HWB-11QT Models Combustible Countertop opening is a “square” cut-out. NOTE: Required minimum clearance below countertop cutout is 8-5/8" (219 mm). Allow additional clearance for units equipped with drain. HWB-FUL & HWBIB-FUL Models HWB-43 Models Figure 12.
  • Page 17 NON-COMBUSTIBLE COUNTERTOP CUTOUT Model All HWB-FUL Models All HWB-43 Models All HWB-7QT Models All HWB-11QT Models All HWBIB-FUL Models NOTE: Required minimum clearance below countertop cutout is 8-5/8" (219 mm). Allow additional clearance for units equipped with drain. HWB-FUL & HWBIB-FUL Models HWB-43 Models Figure 13.
  • Page 18 INSTALLATION Remote Mounted Control Panel WARNING For proper and safe operation the remote control panel location must be mounted on a vertical wall. CAUTION To assure proper operation the remote mounted control panel must be installed in the vertical position. NOTE: A qualified electrician is recommended for connecting the Heated Well units to a power source.

  • Page 19: Drain Assembly Models

    DRAIN ASSEMBLY MODELS WARNING The drain water may reach temperatures in excess of 200°F (93°C). To avoid any injury or damage to the unit use appropriate plumbing materials when installing drain. For proper drain plumbing installation conforming to local plumbing codes consult a licensed plumbing contractor.

  • Page 20: Operation

    This is a temporary condition. To assure safe operation, operate unit without food product until smoke dissipates. Hatco Built-In Heated Wells are designed for WET or DRY operation. NOTE: Built-In Heated Wells cannot be used wet-to- dry or dry-to-wet unless the unit has been allowed to cool down to room temperature before changing the operation.

  • Page 21: Maintenance

    GENERAL The Hatco Built-In Heated Wells are designed for maximum durability and performance, with minimum maintenance. WARNING To prevent electrical shock or injury, turn the power switch OFF, disconnect the unit from the power source and allow to cool before performing any maintenance.

  • Page 22: Accessories

    Some aftermarket or generic replacement parts characteristics that will allow them to operate safely in Hatco equipment. It is essential to use Hatco Replacement Parts when repairing Hatco equipment. Failure to use Hatco Replacement Parts may subject operators of the equipment to hazardous electrical voltage, resulting in electrical shock or burn.

  • Page 23: Troubleshooting

    TROUBLESHOOTING SYMPTOM PROBABLE CAUSE CORRECTIVE ACTION Information to come Form No. HWBM-0107...

  • Page 24: Hatco Limited Warranty

    Hatco reserves the right to accept or reject any such claim in whole or in part. Hatco will not accept the return of any Product without prior written approval from Hatco, and all such approved returns shall be made at Buyer’s sole expense.
  • Page 25 NOTES Form No. HWBM-0107...
  • Page 26 NOTES Form No. HWBM-0107...
  • Page 27 NOTES Form No. HWBM-0107...

  • Page 28: Authorized Parts Distributors

    INDIANA GCS Service Indianapolis 317-545-9655 P.O. Box 340500, Milwaukee, WI 53234-0500 U.S.A. Parts & Service Fax (800) 690-2966 Printed in U.S.A. January 2007 HATCO AUTHORIZED PARTS DISTRIBUTORS NEW YORK Acme American Repairs, Inc. 319-323-1823 Brooklyn Alpro Service Co. 515-262-9308 Brooklyn...

This manual is also suitable for:

Hwb-11qtdHwb-43dHwb-4qtHwb-43Hwb-4qtdHwb-7qt ... Show all

Table of Contents