Mitsubishi Electric MR-J5 User Manual page 34

On a controller [G]
The progress of one-touch tuning can be checked with [One-touch tuning Status (Obj. 2D51h)] during one-touch tuning. When
the progress reaches 100 %, one-touch tuning is completed and [One-touch tuning mode (Obj. 2D50h)] switches to "0".
With push buttons [A]
The following are displayed during one-touch tuning.
One-touch tuning
in progress
Complete
3 ADJUSTMENT METHOD
32
3.2 One-touch tuning
The progress of the one-touch tuning is represented from 0 % to 100 %.
The decimal point moves right to left in rotation during the tuning.
Pushing the "MODE" button during the tuning switches to the status display.
Once the one-touch tuning is complete, the auto-tuned parameters
by the one-touch tuning will be written to the servo amplifier.