Installing The Dummy Sim-Card Slot Filler - Dell Latitude 5430 Service Handbook

Steps
1. Push the dummy SIM-card slot filler from the top side of the palm-rest assembly.
2. Gently lift the dummy SIM-card slot filler out of the palm-rest assembly.

Installing the dummy SIM-card slot filler

Prerequisites
If you are replacing a component, remove the necessary component before the installation procedure.
About this task
The following image indicates the location of the dummy SIM-card slot filler and provides a visual representation of the dummy
SIM-card slot filler installation procedure.
Steps
1. Place the dummy SIM-card slot filler into its compartment on the palm rest.
NOTE: Ensure that the dummy SIM-card slot filler is aligned with the ribs on the palm-rest assembly.
2. Press the dummy SIM-card slot filler until it clicks into place and ensure it fits securely into the SIM card slot.
Next steps
1. Install the palm-rest assembly.
2. Install the display assembly.
3. Install the keyboard assembly.
4. Install the power-button
5. Install the smart card
6. Install the LED board.
7. Install the system board.
NOTE: The system board can be installed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
8. Install the assembly inner
9. Install the memory module.
board.
reader.
frame.
Ta bort och installera komponenter 85