Installing The Led Board - Dell Latitude 5430 Service Handbook

Steps
1. Disconnect the LED-board cable from the connector on the system board.
2. Remove the (M2x3) screw that secures the LED board to the palm-rest assembly.
3. Lift the LED board and cable away from the palm-rest assembly.

Installing the LED board

Prerequisites
Om du byter ut en komponent, ta bort den befintliga komponenten innan du utför installationsproceduren.
About this task
The following image indicates the location of the LED board and provides a visual representation of the installation procedure.
Ta bort och installera komponenter 39