Sim-Kortsplatshållare; Removing The Dummy Sim-Card Slot Filler - Dell Latitude 5430 Service Handbook

SIM-kortsplatshållare

Removing the dummy SIM-card slot filler

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the microSIM
4. Remove the base cover.
5. Remove the 3-cell battery
6. Remove the M.2 2280 solid-state drive
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the memory module.
10. Remove the system board.
NOTE: The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
11. Remove the assembly inner
12. Remove the smart card
13. Remove the LED board.
14. Remove the power-button
15. Remove the keyboard
16. Remove the display assembly.
17. Remove the palm-rest
About this task
NOTE: For models shipped with WLAN antennas only, the dummy SIM-card slot filler is a separate service part and is not
included with replacement palm rest. As a result, the dummy SIM-card slot filler must be removed and then reinstalled when
replacing the palm-rest assembly.
The following image indicates the dummy SIM-card slot filler and provides a visual representation of the dummy SIM-card slot
filler removal procedure.
84 Ta bort och installera komponenter
before working inside your
card.
card.
or 4-cell battery.
or M.2 2230 solid-state
frame.
reader.
board.
assembly.
assembly.
computer.
drive.