Tangentbordsenhet; Removing The Keyboard Assembly - Dell Latitude 5430 Service Handbook

Tangentbordsenhet

Removing the keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the microSIM
4. Remove the base cover.
5. Remove the 3-cell battery
6. Remove the M.2 2280 solid-state drive
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the memory module.
10. Remove the assembly inner
11. Remove the system board.
About this task
NOTE: The system board can be removed with the heat sink attached in order to simplify the procedure and preserve the
thermal bond between the system board and heat sink.
The following images indicate the location of the keyboard assembly and provide a visual representation of the removal
procedure.
54 Ta bort och installera komponenter
before working inside your
card.
card.
or 4-cell battery.
or M.2 2230 solid-state
frame.
computer.
drive.