Steps
1. Align and place the battery cable on the battery.
2. Route the battery cable through the routing guides on the battery.
3. Connect the battery cable to the connector on the battery.
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Install the
microSIM
card.
4. Install the
microSD
card.
5. Follow the procedure in
Innerramens enhet
Removing the assembly inner frame
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
microSIM
4. Remove the
base
cover.
5. Remove the
3-cell battery
6. Remove the
M.2 2280 solid-state drive
7. Remove the
WLAN
card.
8. Remove the
WWAN
card.
About this task
The following image indicates the location of the assembly inner frame and provides a visual representation of the removal
procedure.
or
4-cell
battery.
after working inside your
before working inside your
card.
card.
or
4-cell
battery.
or
M.2 2230 solid-state
computer.
computer.
drive.
Ta bort och installera komponenter
35