6. Install the
base
cover.
7. Install the
microSIM
card.
8. Install the
microSD
card.
9. Follow the procedure in
Sensorkort
Removing the sensor board
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
microSIM
4. Remove the
base
cover.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
display
assembly.
8. Remove the
display
bezel.
About this task
The following images indicate the location of the sensor board and provide a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the display cable from connector on the sensor board.
2. Gently lift the sensor board away from the display back cover.
Installing the sensor board
About this task
The following images indicate the location of the sensor board and provide a visual representation of the removal procedure.
76
Ta bort och installera komponenter
after working inside your
before working inside your
card.
card.
computer.
computer.