Steps
1. Align the screw hole on the left hinge with the screw hole on the display back cover.
2. Replace the two screws (M2.5x3) to secure the left hinge to the display back cover.
3. Align the screw hole on the right hinge with the screw hole on the display back cover.
4. Replace the two screws (M2.5x3) to secure the right hinge to the display back cover.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
WLAN
card.
5. Install the
WWAN
card.
6. Install the
base
cover.
7. Install the
microSIM
card.
8. Install the
microSD
card.
9. Follow the procedure in
after working inside your
computer.
Ta bort och installera komponenter
79