Siemens RDS110 User Manual page 30

6
Operating the thermostat on the device
Advanced settings
Heating setpoints
30 | 59
No. Application Descriptions
settings
11. Comfort The default heating
setpoint for "Comfort"
heating
setpoint defined in a
scheduler. This
setpoint must be
higher than that for
protection.
12. Economy The default heating
heating setpoint for
"Economy" defined in
setpoint
a scheduler. This
setpoint must be
higher than that for
protection.
13. Unoccupied The default heating
heating setpoint for
"Unoccupied" mode.
setpoint
This setpoint must be
higher than that for
protection.
14. Protection The default minimum
heating heating setpoint to
setpoint maintain when you
switch the thermostat
to "OFF" under
"Operating mode".
15. Max. The default maximum
heating heating setpoint if the
setpoint thermostat is not
switched to "OFF". If
it is "OFF", the
maximum heating
setpoint is then the
heating protection
setpoint.
Factory Range
settings
0...50 ° C
21 ° C
0...50 ° C
19 ° C
0...50 ° C
15 ° C
0...50 ° C
7° C
>
0...50 ° C
35° C
A6V10877569_en--_f
Dependencies
N/A
N/A
N/A
This setpoint is
valid only if you
keep the
default
Protection
option for
Application
setting No. 37.
The heating
protection
setpoint is valid
only if you
keep the
default
Protection
option for
Application
setting No. 37.