Siemens RDS110 User Manual page 33

Functions
Temperature offsets
A6V10877569_en--_f
No. Application Descriptions
settings
24. Pump/valve A circle kicked in to
kick cycle turn on a constantly
idle pump or valve
for a minimum period
of time to protect the
pump or valve from
being locked up. You
can set the kick-in
time interval by
yourself; however,
the minimum time
period the pump or
valve is switched ON
depends on what
heating controllers
setting you've
selected.
25. Room Allows switching to
"Comfort"
presence
detector automatically if an
unoccupied room is
detected to be
occupied when a
scheduled
"Unoccupied" mode
is running.
No. Application
Descriptions
settings
26. Built-in Temperature offset
temp. value for the built-in
sensor adj. room temperature
sensor.
27. X1 temp. Temperature offset
sensor adj. value for the room
temperature sensor
connected in terminal
X1.
28. X2 temp. Temperature offset
value for the room
sensor adj.
temperature sensor
connected in terminal
X2.
Operating the thermostat on the device
Advanced settings
Factory Range
settings
1...8760 h
500 h
Active N/A
Factory
Range
settings
0 K -5...5 K
0 K -5...5 K
0 K -5...5 K
6
Dependencies
Application
setting No. 38;
This function
displays only if
you select the
equipment type
as one of the
following in
Changing
system setup
[➙ 37]:
Radiator with
valve,
Radiator with
pump, Floor
heating with
valve or Floor
heating with
pump.
N/A
Dependencies
Valid only if the
built-in
temperature
sensor is used
to measure the
temperature.
Valid only if an
external room
temperature
sensor is
connected
using X1.
Valid only if an
external room
temperature
sensor is
connected
using X2.
33 | 59