Setting Up An Rf Interlink Network - Quell Q2300W User Manual

7.1 Setting Up an RF Interconnect Network
Step 1 Have an electrician
mount the smoke
alarm bases.
Step 2 Gather all smoke
alarms. Select one
smoke alarm and pull
yellow tab to activate
battery. This smoke
alarm will be know as
the host.
Push the RF button
two times on the
host( first powered)
device.
Step 3 Power up Remaining
Devices: Power up
by pulling out battery
yellow battery tab on
the rest of Q2300W
smoke alarms. They
will automatically join
the open network.
Step 4 Pick Any Connected
Device: Push the
RF button twice on
any unit after all the
smoke alarms have
joined the network.
14
User Input Detector
Response
Amber LED flashes
every 2 seconds. The
host has now opened
the network for
smoke alarms to join.
Amber LED ashes
3 times every 2
seconds after joining
the network.
Amber LED stops
ashing on each unit as
network is now closed.
Timeout
Join Mode will
timeout in 15
minutes after
last unit joins.
Join Mode will
timeout in 15
minutes after
last unit joins.
Join Mode will
timeout in 15
minutes after
last unit joins.