Advertisement
Operation
___________________________________________________________
Sequence of operation
Sequence of operation per the customer. The Instruct controller is programmed to control the drive.
Note: The Service Outlet (SO) Ethernet port is a maintenance/ diagnostic port. Only connect ABB keypad to
Ethernet port for drive diagnostics. Power outlet 100VA max intended for computer supplies only.
The unit is designed for the ambient air temperature not to exceed +50
standard is ≤ 1000m. Above 1000m derate of current required. Relative humidity 5...95%. No condensation
allowed.
The air to air heat exchanger(s) are thermostatically controlled and will turn on when interior temperature
reaches 32
o
C [90
ACS880-0P SENSIA CE SUPPLEMENT [3AXD50000905423]
o
F]. The sine filter fan will run when the drive is running.
o
C. The installation site altitude
20
Advertisement
