Advertisement
The tools required for moving the unit to its final position and completing the mechanical installation are listed
below:
Crane, fork-lift or pallet truck
Industry standard tools, such as but not limited to: screwdrivers (flat, Philips, Torx), wrenches, sockets,
torque wrenches, tape measure, level and other tools used in standard electrical installations
Metal shims (optional)
Moving and unpacking the drive
Move the drive to the installation site, preferably in the original package to avoid damaging the
cabinet surfaces and door devices. If using a pallet truck, check its load capacity before you move the drive.
Lifting the cabinet
Lift the drive cabinet to its position using its lifting eyes.
R9, 156A to 361A
A 6 ft "spreader beam" using (4) 6 ft straps is recommended for lifting the R9 enclosure. A 1-Point lift using (4)
6 ft straps has been analyzed to be safe but is not the recommended method of lifting.
R11, 502A to 880A
A 6 ft "spreader beam" using (4) 6 ft straps is recommended for lifting the R11 enclosure. A 1-Point lift using
(4) 6 ft straps has been analyzed to be safe but is not the recommended method of lifting.
ACS880-0P SENSIA CE SUPPLEMENT [3AXD50000905423]
13
Advertisement
