Silvercrest SGB 1200 F1 Operation And Safety Notes page 10

Electrical safety
mDANGER! Risk of electric
shock! Never attempt to
repair the product yourself .
In case of malfunction, repairs
are to be conducted by
qualified personnel only .
mDANGER! Risk of electric
shock! Do not immerse the
product in water or other
liquids . Never hold the product
under running water .
mDANGER! Risk of electric
shock! Never use a damaged
product . Disconnect the product
from the power supply and
contact your retailer if it is
damaged .
The product is not to be used
if it has been dropped, if there
are visible signs of damage .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Regularly check the power
plug and the power cord for
damages . If the supply cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard .
Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .
GB/IE/NI/CY 9