Advertisement
4-1.Installation of a Bracket
A low profile PCI bracket is attached to this product at factory shipment. If you insert this product in
a full height PCI slot, you have to replace the bracket with a full height one that comes with this
product.
1.
Remove the two screws.
2.
As shown in the figure on the left side of the figure below, Rotate the bracket toward the arrow
and remove it.
3.
Install the full height PCI bracket to this product.
Align the "raised dot" on the LAN port to the "hole" on the bracket.
Exchange of a bracket uses the cross slot screwdriver suitable for the size of a
screw.
Advertisement
