Operation - Westfalia 96 47 76 Original Instructions Manual

Before the first Use
 Unpack the jack stands and check them for transport damage. Dispose of any
packaging material that is not required or keep it in a place inaccessible to
children. There is a risk of suffocation!
 Insert the rack / saddle unit into the base of the jack stands. Bend the safety
tab (4) inwards, e.g. with a pair of pliers, to securely couple the rack / saddle
unit to the base.

Operation

1. Place the vehicle on a level surface and jack it up with a jack. Secure the
vehicle beforehand against rolling away, e.g. with the help of brake wedges.
2. Set the required height of the jack stands. Lift the release lever (2) in the
base and hold the rack (1) at the required height. Then lower the unlocking
lever and fix the rack in the set position.
3. Secure the rack with the locking pin (3).
4. Place the jack stands in a suitable place under the vehicle. It is essential that
you also observe the information provided by the vehicle manufacturer. Only
use the jack stands in pairs per axle.
5. Lower the jack until the vehicle is securely seated on the jack stands. Always
check that the jack stands are correctly positioned. If necessary, lift the load
again to correct the positioning of the jack stands.
6. After finishing the work, raise the vehicle again, remove the jack stands one
after the other and slowly lower the vehicle again. Make sure that no people
and / or objects remain under or within range of the vehicle. Pull out the
locking pin (3) and lift the release lever (2) and lower the saddle all the way.
Operation
10