Safety And Compliance; Safety Information And Electromagnetic Compliance; Safety Warnings; Disconnect Device Warning - Cisco CISCO10720 Installation And Configuration Manual

Chapter 2 Preparing for Installation

Safety and Compliance

Before you begin any of the procedures in this publication, review the safety and compliance guidelines
in the following sections to avoid injuring yourself or damaging the equipment:
•
•
•
•
•

Safety Information and Electromagnetic Compliance

For information about regulatory compliance and safety, refer to the
Information for the Cisco 10720 Internet Router
information in the
contains important safety information that you must read and understand before attempting to install,
remove, or modify any hardware in your router.
For more information about safety and electromagnetic compliance, see the
Warnings" section on page x

Safety Warnings

Safety warnings appear throughout this publication in procedures that, if performed incorrectly, can
harm you. A warning symbol precedes each warning statement. The following paragraph is an example
of a safety warning:
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. To see translations of the warnings that appear in this
publication, refer to the
Cisco 10720 Internet Router
For safety warning translations, see the

Disconnect Device Warning

Disconnect the Cisco 10720 Internet Router power source before performing any maintenance task on
the hardware modules.
Only trained and qualified personnel should be allowed to install or replace this equipment.
Warning
The plug-socket combination must be accessible at all times because it serves as the main
Warning
disconnecting device.
78-13113-06 B0
Safety Information and Electromagnetic Compliance, page 2-3
Safety Warnings, page 2-3
Disconnect Device Warning, page 2-3
Laser Safety, page 2-4
Preventing Electrostatic Discharge, page 2-4
"Electromagnetic Compliance" section on page ix
and the
Regulatory Compliance and Safety Information for the
document that accompanied this device.
publication that is shipped with your device, and
"Electromagnetic Compliance" section on page
"Translated Safety Warnings" section on page
Safety and Compliance
Regulatory Compliance and Safety
of this document. This publication
"Translated Safety
ix.
x.
Book Title
2-3