Compliance And Safety Information; Laser Safety - Cisco 8100 Series Hardware Installation

Compliance and Safety Information

• Keep the work area clear, smoke and dust-free during and after installation. Do not allow dirt or debris
• Do not wear loose clothing, jewelry, or other items that could get caught in the router or other associated
• Cisco equipment operates safely when used in accordance with its specifications and product-usage
• If potentially hazardous conditions exist, do not work alone.
• Take care when connecting multiple units to the supply circuit so that wiring is not overloaded.
• This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
• When installing or replacing the unit, the ground connection must always be made first and disconnected
• To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
• Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when
Compliance and Safety Information
The Cisco 8000 Series Routers are designed to meet the regulatory compliance and safety approval requirements.
For detailed safety information, see
Routers.

Laser Safety

Warning
Statement 1051 Laser Radiation
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or
view directly with optical instruments.
Hardware Installation Guide for Cisco 8100 Series Routers
8
to enter into any laser-based components.
components.
instructions.
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain about whether suitable grounding is available.
last.
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to
support the weight of the unit.
servicing.
Regulatory Compliance and Safety Information—Cisco 8000 Series
Prepare for Installation