Advertisement
Contents
Connections
G Select the "PMA-1700NE" format.
It is normally recommended to set the format to "2 ch 32-bit Integer
0
384.0 kHz".
⑦
H Quit Audio MIDI Setup.
Front panel
Rear panel
Playback
Settings
o Playback
Install the desired player software on your computer beforehand.
Use the rear panel USB-DAC port to connect this unit to a computer.
(v p. 23)
1
39
Remote control
unit
Tips
Press the input source select button (USB-DAC) to
switch the input source to "USB-DAC".
Start playback on the computer's player software.
If the sampling frequency cannot be detected, "Unlocked" will be
0
displayed.
"Unsupported" is displayed when audio signals that are not
0
supported by this unit are input.
Index
Appendix
Advertisement
