EcoFlow Smart Generator User Manual page 12

Checking Before Use
Warning Please check the following components carefully each time before using the generator.
a) Check the fuel level
Take off the fuel cap and check the fuel level. Inject more fuel into the tank if the fuel level is too low.
b) Check the engine oil level
Make sure there are no engine oil leaks.
Check the engine oil level. If the oil level is low, the engine oil
alarm system may shut off the engine.
1. Unscrew the lid, take out the oil dipstick and wipe it clean.
2. Dip the oil dipstick into the oil filler without screwing it in, and
check the oil level.
3. Add the recommended amount of engine oil if the oil level is low.
4. Screw the oil dipstick and lid firmly shut.
c) Check whether the rechargeable battery is connected correctly
Turn the maintain cover knob to Open, take off the maintenance cover and check whether the positive
and the negative wires of battery are connected correctly.
Malfunctions While Running
Check for any issues while the generator is running and consult EcoFlow for further technical support if
necessary.
8
Engine oil level check