HighSecLabs SM20N-3 Quick Setup Manual page 4

SECTIONS
Table of Contents
INSTallaTIoN
Installing the KM
General
• Verify that all peripherals and computers are turned off prior to
connecting them to the product.
• The KM's back panel is divided into Console Ports and Computer
Ports sections.
Step 1 – Connect peripherals to the KM Console ports
• Keyboard: Connect either a USB or PS/2 keyboard to the
corresponding KM console keyboard port.
• Mouse: Connect either a USB or PS/2 mouse to the corresponding
KM console mouse port.
• USB peripherals: Connect USB peripherals to the KM console fUSB
port.
Note: authentication devices such as smartcard and biometric readers are
enabled by default, other devices must be explicitly whitelisted – for further
information please refer to the KM administrator's guide.
Note: 4 channel product illustrations shown throughout this manual are
applicable to other KM models.
HSL Secure KM Switch Quick Setup Guide
1
• Connect peripherals which are due to be shared by the KM to the
Console ports.
• Connect computers that require access to the shared peripherals
to the Computer ports.
Smart-Card
Reader
Audio
fUSB Cable
Audio Cable
Mouse Cable
Display Cable
Keyboard Cable
2
Displays
Keyboard Mouse
CONSOLE PORTS COMPUTER/SOURCE PORTS
3
Computers
3