Table of Contents
Advertisement
VLT® PTC Thermistor Card MCB 112
Operating Guide
2.
Connect X44/12 on the option to terminal 37 on the drive.
3.
Connect terminal X44/10 to a digital input of the drive. For reference when programming, note the number of selected
digital input.
3.7 Assembly
Procedure
1.
Remove the knock-out in the extended LCP frame, so that the option fits under the extended LCP frame.
2.
Fit the extended LCP frame and terminal cover.
3.
Fit the LCP or blind cover in the extended LCP frame.
4.
To indicate that the ATEX module is integrated, apply the delivered sticker to the front of the drive, see
the
Drive.
5.
Connect power to the drive.
6.
Perform risk assessment and a commissioning test according to EN ISO 12100.
Danfoss A/S © 2022.08
Installation
1.5.1.1 Markings of
AQ267038105120en-000101 / 130R0104 | 17
Advertisement
Table of Contents
Need help?
Do you have a question about the VLT PTC Thermistor Card MCB 112 and is the answer not in the manual?
Questions and answers
Is PTC Thermistor card required in PESO certification also?