Introduction - Texas Instruments SimpleLink Wi-Fi CC3 20 Series User Manual

Introduction

1 Introduction
1.1 Overview
This document describes the Texas Instruments SimpleLink™ Wi-Fi
applications. The main focus of this document is on the usage of the Android™ and iOS
for UI requirements, networking, and provisioning APIs required for building the mobile application.
The CC31xx and CC32xx devices are part of the SimpleLink™ microcontroller (MCU) platform which
®
consists of Wi-Fi , Bluetooth
to-use development environment with a single core software development kit (SDK) and rich tool set. A
one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio's
devices into your design, allowing 100 percent code reuse when your design requirements change. For
more information, visit www.ti.com/simplelink.
The first step in utilizing a CC32xx/CC31xx device in a Wi-Fi
®
to a Wi-Fi network (access point). This process is called Wi-Fi
information of the access point (SSID name and security credentials) to the device. This process can be
complex considering that embedded Wi-Fi
touch screens.
2
®
SimpleLink™ Wi-Fi CC3x20 and CC3x35 Provisioning for Mobile
Applications
low energy, Sub-1 GHz and host MCUs, which all share a common, easy-
®
®
applications generally lack user interfaces such as keypads or
Copyright © 2017–2019, Texas Instruments Incorporated
®
provisioning solution for mobile
®
-enabled application is to connect the device
®
provisioning and it involves loading the
SWRU472A – February 2017 – Revised April 2019
Submit Documentation Feedback
www.ti.com
®
building blocks