Texas Instruments SimpleLink Wi-Fi CC3 20 Series User Manual page 3

www.ti.com
Figure 1 illustrates a general overview of this procedure: a device which is not connected to the network,
but exists in the network range, can accept the information required for connecting to the network, using
the combination of the embedded application (see
chip™ Solution Device
SWRU472A – February 2017 – Revised April 2019
Submit Documentation Feedback
Provisioning) and the mobile application.
Figure 1. General Overview
SimpleLink™ Wi-Fi
Copyright © 2017–2019, Texas Instruments Incorporated
CC31xx, CC32xx SimpleLink™ Wi-Fi
®
CC3x20 and CC3x35 Provisioning for Mobile
Introduction
®
Internet-on-a
3
Applications