Table of Contents
Advertisement
to remove the load and press the ONCE.OCP button. The voltage
and current regulations will be restored and output will resume.
LOCK / UNLOCK
Press and hold the Voltage knob for two seconds to lock all of the
settings currently programed in the unit. Only the Power button will
still function when the unit is locked. To unlock the unit, press and
hold the Voltage knob for two seconds again.
5V Limit Mode
This unit comes with an option to limit the voltage output to 5V
when working on delicate components. To switch the available
voltage output from 30V to 5V, ensure the unit is powered off and
slide the switch on the back of the unit to read 5V. When the unit
is powered back on, the 5V indicator on the front of the unit will be
lit and the voltage output will not be able to be set above 5V. When
working with sensitive low voltage parts, this can help to ensure
they are not overloaded.
Over Temperature Protection (OTP)
The unit is equipped with a self-regulating fan to ensure that
the unit does not overheat. The fan will not run under normal
circumstances, however if the unit temperature rises to a point that
the fan is needed it will automatically kick in to dissipate the heat
from the unit. It is important that the back of the unit has plenty of
space behind it for this to work effectively.
OVER POWER PROTECTION (OPP)
The unit also has Over Power Protection.
MEMORY RECALL BUTTONS
This unit has 4 memory recall buttons that can be programmed
so you can save commonly used settings. The voltage, amps,
continuous/once output current protection (CONT.OCP), and
constant current/voltage settings will all be saved in the memory
button.
To save the current settings of the unit to a memory button, press
and hold the memory button of choice for two seconds, the unit will
beep indicating it has saved the settings.
To choose a preset, simply press the memory recall button briefly
and the settings on the unit will update automatically.
- 8 -
Advertisement
Table of Contents
