Gree GSAF209XAE Owner's Manual page 16

Introduction for buttons on remote controller
Note:
● Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.
● Before setting TIMER ON or TIMER OFF, please adjust the clock time.
● After starting up TIMER ON or TIMER OFF, set the constant circulating valid.
After that, air conditioner will be turned on or turned off according to setting time.
ON/OFF button has no effect on setting. If you don't need this function, please
use remote controller to cancel it.
11
CLOCK button
Press this button to set clock time. "
"▲" or " " button within 5s to set clock time. Each pressing of "▲" or "
clock time will increase or decrease 1 minute. If hold "▲" or "
time will change quickly. Release this button when reaching your required time.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation can't exceeds 5s. Otherwise, remote contro-
ller will quit setting status. Operation for TIMER ON/TIMER OFF is the same.
12
QUIET button
Press this button, the Quiet status is under the Auto Quiet mode (display "
"AUTO" signal ) and Quiet mode (display "
signal of " " displayed), after powered on, the Quiet OFF is defaulted.
Note:
● The Quiet function cannot be set up in Fan and Dry mode.
● The Quiet function is only available for some models.
13
X-FAN button
Pressing this button in COOL or DRY mode, the icon "
indoor fan will continue operation for a while in order to dry the indoor unit even
though you have turned off the unit. After energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
● Having set X-FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for a while. at low speed. In this
period, press X-FAN button to stop indoor fan directly.
● Having set X-FAN function off: After turning off the unit by pressing ON/OFF
button, the complete unit will be off directly.
" icon on remote controller will blink. Press
" singal) and Quiet OFF (there is no
13
" button,
" button, 2s later,
" is displayed and the
" and