Gree GSAF209XAE Owner's Manual page 13

Introduction for buttons on remote controller
● When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator "
temperature. Press "FAN" button to adjust fan speed. Press "
adjust fan blowing angle. (Cooling only unit won't receive heating mode signal. If
setting heat mode with remote controller, press ON/OFF button can't start up the
unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30℃ (61-86°F);
Fan speed: auto, low speed, medium speed, high speed.
3
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), low(
( ), high(
Note:
● Under AUTO speed, air conditioner will select proper fan speed automatically
according to ex-factory setting.
● Fan speed under dry mode is low speed.
4
TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. "
to exit turbo function and "
If start this function, the unit will run at super-high fan speed to cool or heat quickly
so that the ambient temp. approachs the preset temp. as soon as possible.
5
▲/ button
● Press "▲" or "
Holding "▲" or "
tor on indoor unit will change accordingly. (Temperature can't be adjusted under
auto mode)
● When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons) When setting
TIMER ON, TIMER OFF or CLOCK, press "▲" or "
to CLOCK, TIMER ON, TIMER OFF buttons)
" on indoor unit is ON. Press "▲" or "
).
Auto
" icon is displayed on remote controller. Press this button again
" icon will disappear.
" button once increase or decrease set temperature 1℃ (°F).
" button, 2s later, set temperature on remote controller will
" button to adjust time. (Refer
10
" button to adjust set
" / " " button to
), medium
" button to