Table of Contents
Advertisement
Remove the Bin Door
•
Grasp the rear of the bin door and pull bin door
forward approximately 5".
•
Slide bin door to the rear while applying upward
pressure (The rear door pins will ride up into the track
slot and slide backward to the stop tab).
•
While applying pressure against the bin door pull
down on the rear of each bin door track until the door
pins clear the stop tabs.
•
Slide the rear door pins off the end and then below
the door track. Slide bin door forward allowing the
back of the door to lower into the bin. Continue
forward with the bin door until the front pins bottom
out in the track.
•
Lift right side of door until the front pins clear the
track, then remove door from bin.
•
Remove rollers (4) from all door pins.
TRACK SLOT
56
STOP TAB
Part Number 8001119 10/19
SLIDE DOOR
FORWARD
SV1748
Advertisement
Table of Contents
