Table of Contents
Advertisement
DSP 3320i-ODS, DSP 3325i-ODS, DSP 3333i-ODS
User manual
9.4 General Data
Parameter
DSP 3320i-ODS
Ambient temperature
range
Allowable relative
humidity range
Topology
Degree of protection
Max. operating altitude
Noise
Weight
Cooling
Dimension
Warranty
DSP 3325i-ODS
DSP 3333i-ODS
-25℃...+60℃
0...100% no condensing
Transformerless
I P65
<2000m
<30dB
<45dB
37kg
Nature
Fan
666*512*254mm
5/10 years(Optional)
DSP 3320i-ODS, DSP 3325i-ODS, DSP 3333i-ODS
User manual
The standard warranty period for DASS TECH Inverter is 5/10 years(Optional) which depends
on the purchase agreement. Up to 12 months following the installation date or 18 months
from the date of shipment (whichever date comes first) from DASS TECH factory, the
purchaser may apply for a warranty extension by providing the serial number of the unit.
DASS TECH may reject the application received which does not meet the date requirement.
Extension warranty can be purchased for extra 5, 7, 10 or 12 years. For more details please
check with DASS TECH service team. Monitoring devices (WiFi card, Ethernet card, GPRS card,
GPRS kit) are not included in the on-site service range, but DASS TECH could provide remotely
service and replacing service.
Disclaimer:
During the warranty period, DASS TECH guarantees normal operation of the inverter
during the warranty period, the inverter develops fault, please contact your installation
contractor or supplier. In case of faults falling within manufacturers' responsibility, DASS
TECH will be responsible for maintenance or replacement. Any defect caused by the
following circumstances will not be covered by the manufacturer's warranty (the Dealers or
Distributors are responsible and authorized by DASS TECH for the following investigation):
Product modified, design changed or parts replaced not approved by DASS TECH;
Changes, or attempted repairs and erasing of series number or seals by non DASS TECH
technician;
Incorrect installation,design or commissioning;
Failure to comply with the local safety regulations (in Germany VDE standards for example.);
The Product has been improperly stored and damaged while being stored by the Dealer or the end
user;
Transport damage (including painting scratch caused by movement inside packaging during
shipping). A claim should be made directly to shipping company/ insurance company as soon as the
container/ packaging is unloaded and such damage is identified;
Failure to follow any/all of the user manual, the installation guide and the maintenance regulations;
Improper use or misuse of the device;
Insufficient ventilation of the device;
The maintenance procedures relating to the product have not been followed to an acceptable
standard;
Damage because of external factors or Force majeure (violent or stormy weather, lightning,
overvoltage, fire etc.).
63
64
10
Quality Assurance
If
.
Advertisement
Table of Contents
