Table of Contents
Advertisement
Error on tracking
Communication error between Universal Comm. Kit and an outdoor unit during the tracking (During initial operation)
Description
Reason
1. Checking method
Compare and check the setting value for the number of
and the real number of Universal Comm. Kit installation.
Is the actual number of Universal
Comm. Kit installation the same as
the setting value for the number of
Universal Comm. Kit installation?
the display part to check the number of Universal
Comm. Kit which responds to the tracking.
Is there a response from Universal
Comm. Kit on the display part during the
tracking?
connected to Universal Comm. Kit from an outdoor unit,
unit and Universal Comm. Kit and between indoor units.
by connecting one by one.
Communication error between Universal Comm. Kit and an outdoor unit
Refer to the diagram below.
Yes
No
Yes
Yes
one indoor unit.
No
Universal Comm. Kit installation set up on the
Yes
Kit that displays the communication error.
repeated, communication error may occur. In this
case, the communication error may occur with all
address setting is incorrectly set.
If there is no problem with the address, check
the communication cable and replace the
No
• Wired remote controller will display
the same error shown in the outdoor
NOTE
unit.
51
Advertisement
Table of Contents
