Samsung MCM-D211UN Installation Manual page 38

Setting an address and installation option of Universal Comm. Kit
05 series installation option
(When setting
for mode change
Heating
Damper minimum
output
Capacity setting
05 series installation option(Detailed)
Option
Explanation
Remote
Controller
Display
Indication Details Indication
Indication
and Details
38
Change Over or
Cooling only for
HR only
(When setting
required for mode
change
Damper opening
minimum
temperature
Fan Feedback
MODE
Over or Cooling only for
HR only
Details Indication Details
Follow
product
options
Change Over
for HR only
Use Cooling
only indoor
unit for HR
Standard heating
temp. Offset
Compensation option
for Long pipe or
height difference
between indoor units
Damper control
setting
Defrost signal
Standard heating temp. Offset Standard cooling temp.
Indication Details Indication
(When setting
Standard for mode
cooling temp.
Offset
- Criterion enthalpy
Control Method Control variables
by using simple when using hot
BMS water/external heater
Skip the
prevention of
cold air
Offset Cooling
Details Indication
Cooling
Sensor
Details